Industrial Isolated 8-CH RS485 Hub, Extends 8-ch RS485 Slave Ports via 1-ch RS485 Master Port, 300～460800bps Wide Baud Rate, with Network Relay, Extension, Isolation Function, Support Rail-Mount

Introduction RS485-HUB-8P is an industrial grade isolated RS485 hub that can expand 8-ch RS485 slave ports through 1-ch RS485 master port and can realize relay, extension, and isolation functions of RS485 network. It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring... Specification Interface Standard --Compliant with RS485 Standard Physical Interface --RS485 Screw Terminal Baudrate--300~460800bps (self-adaptive) Supported Nodes--Each RS485 port supports up to 32 nodes Communication Distance --1200m (9600bps), the higher rate the shorter distance Operating Method --RS485 two-wire (A, B), half-duplex transparent transmission Power Supply --DC 9~24V Operating Temperature ---45 ~ +85℃ Environment Humidity --<95%RH Transmission Medium --Normal parallel cables/twisted-pair cables Supports RS485 network relay, extension and isolation functions 1. Extension:When the master RS485 device needs to connect 8x RS485 slaves in a star connection, connect the master to the RS485-HUB-8P master port and the slaves to the RS485-HUB-8P slave port. It can prevent interference between RS485 and isolate effectively. 2. Isolation:By connecting one end of the RS485 to the RS485 master port and the other end to any RS485 slave port, the RS485 cable is effectively isolated and protected from lightning strikes and interference. The other end of RS485 is effectively protected from damage by high voltage and strong current. 3. Relay:When the RS485 cable exceeds a long distance such as 1200 meters, the signal will be attenuated and interference will increase. By using RS485-HUB-8P, the communication distance can be extended. Online Tutorial/Online Document: n9.cl/csxor Package Content RS485-HUB-8P x1

• RS485-HUB-8P is an industrial grade isolated RS485 hub that can expand 8-ch RS485 slave ports through 1-ch RS485 master port and can realize relay, extension, and isolation functions of RS485 network, with screw terminal for power input. Rail-mount case design, easy to install, and cost-effective.It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring...
• 【Connection diagram】 The isolated RS485 master port can be connected to the RS485 host device, and the extended 8-ch isolated RS485 port can be connected to various RS485 slave devices, such as RS485 sensors, etc.
• 【Industrial isolation protection】 Built-in photoelectric isolation protection circuit, can effectively isolate RS485 master and slave devices to avoid the damage of ground potential difference between devices, anti-electrostatic, lightningproof & anti-surge, which is suitable for the industrial environment with high reliability and safety requirements.
• 【Wide baud rate range】Supports 300～460800bps wide baud rate communication range (self-adaptive)
• 【Rail-Mount Support】Supports 35mm standard guide rail, with rail-mount buckle, easy to install.